marlin bugfix + SKR + BLTOUCH

Marlin-bugfix-2.0.x/buildroot/share/tests/DUE-tests

@@ -14,7 +14,7 @@ opt_set TEMP_SENSOR_BED 2
 opt_set GRID_MAX_POINTS_X 16
 opt_set FANMUX0_PIN 53
 opt_enable S_CURVE_ACCELERATION EEPROM_SETTINGS GCODE_MACROS \
-           PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING CODEPENDENT_XY_HOMING \
+           FIX_MOUNTED_PROBE Z_SAFE_HOMING CODEPENDENT_XY_HOMING ASSISTED_TRAMMING \
            EEPROM_SETTINGS SDSUPPORT BINARY_FILE_TRANSFER \
            BLINKM PCA9533 PCA9632 RGB_LED RGB_LED_R_PIN RGB_LED_G_PIN RGB_LED_B_PIN LED_CONTROL_MENU \
            NEOPIXEL_LED CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CASE_LIGHT_MENU \
@@ -24,13 +24,14 @@ opt_enable S_CURVE_ACCELERATION EEPROM_SETTINGS GCODE_MACROS \
            BACKLASH_COMPENSATION BACKLASH_GCODE BAUD_RATE_GCODE BEZIER_CURVE_SUPPORT \
            FWRETRACT ARC_SUPPORT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
            PSU_CONTROL AUTO_POWER_CONTROL \
-           SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER \
+           PIDTEMPBED SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER \
            PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL \
            EXTENSIBLE_UI
 opt_add    EXTUI_EXAMPLE
 opt_set E0_AUTO_FAN_PIN 8
 opt_set EXTRUDER_AUTO_FAN_SPEED 100
 opt_set TEMP_SENSOR_CHAMBER 3
+opt_add TEMP_CHAMBER_PIN 6
 opt_set HEATER_CHAMBER_PIN 45
 exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), EXTENSIBLE_UI, S-Curve, many options."
 

Marlin-bugfix-2.0.x/buildroot/share/tests/STM32F103RC_fysetc-tests

@@ -9,7 +9,7 @@ set -e
 #
 # Build with the default configurations
 #
-use_example_configs "FYSETC/Cheetah 1.2/base"
+use_example_configs "Creality/Ender-3/FYSETC Cheetah 1.2/base"
 exec_test $1 $2 "Cheetah 1.2 Configuration"
 
 # clean up

Marlin-bugfix-2.0.x/buildroot/share/tests/STM32F103RET6_creality-tests

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+#
+# Build tests for STM32F103RET6_creality
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with configs included in the PR
+#
+use_example_configs "Creality/Ender-3 V2"
+exec_test $1 $2 "Ender 3 v2"
+
+restore_configs

Marlin-bugfix-2.0.x/buildroot/share/tests/rambo-tests

@@ -18,6 +18,7 @@ opt_set TEMP_SENSOR_BED 2
 opt_set TEMP_SENSOR_PROBE 1
 opt_add TEMP_PROBE_PIN 12
 opt_set TEMP_SENSOR_CHAMBER 3
+opt_add TEMP_CHAMBER_PIN 3
 opt_add HEATER_CHAMBER_PIN 45
 opt_set GRID_MAX_POINTS_X 16
 opt_set FANMUX0_PIN 53

Marlin-bugfix-2.0.x/buildroot/share/tests/rumba32-tests

@@ -0,0 +1,39 @@
+#!/usr/bin/env bash
+#
+# Build tests for rumba32
+#
+
+# exit on first failure
+set -e
+
+# Build examples
+restore_configs
+opt_set MOTHERBOARD BOARD_RUMBA32_V1_0
+opt_set SERIAL_PORT -1
+opt_disable PIDTEMP
+opt_enable PIDTEMPBED
+opt_set TEMP_SENSOR_BED 1
+opt_disable THERMAL_PROTECTION_BED
+opt_set X_DRIVER_TYPE TMC2130
+exec_test $1 $2 "RUMBA32 V1.0 with TMC2130, PID Bed, and bed thermal protection disabled"
+
+# Build examples
+restore_configs
+opt_set MOTHERBOARD BOARD_RUMBA32_V1_1
+opt_set SERIAL_PORT -1
+opt_enable PIDTEMPBED EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+opt_set TEMP_SENSOR_BED 1
+opt_set X_DRIVER_TYPE TMC2130
+opt_set Y_DRIVER_TYPE TMC2208
+exec_test $1 $2 "RUMBA32 V1.1 with TMC2130, TMC2208, PID Bed, EEPROM settings, and graphic LCD controller"
+
+# Build examples
+restore_configs
+opt_set MOTHERBOARD BOARD_RUMBA32_MKS
+opt_set SERIAL_PORT -1
+opt_set X_DRIVER_TYPE TMC2130
+opt_set Y_DRIVER_TYPE TMC2208
+exec_test $1 $2 "RUMBA32 MKS Default Config with Mixed TMC Drivers"
+
+# cleanup
+restore_configs